// Switches

 

SERIES P1H

Dia-Seal Piston
The P1H is well-suited for applications with the following requirements: NEMA 4 enclosure, long life, high cycle, ranges from 5 to 1,600 psi.

SERIES P1X

Explosion Proof Dia-Seal Piston
The P1X is well-suited for applications with the following requirements: explosion proof, long life, high cycle, NEMA 7 & 9 enclosure, ranges from 5 to 1,600 psi.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
BOURDON TUBE MODELS
The bourdon tube models are for applications requiring up to 18,000 psi, instrument accuracy of +/- 1% and where cycles are fewer than 25 per minute.
SERIES B1S, B2S, B1T, B2T

Bourdon Tube Switch
The B1S (single set point) and B2S (dual set point) are stripped (no housing) models, well-suited for applications with the following requirements: high accuracy, up to 18,000 psi working pressure an 20,000psi proof.

The B1T (single set point) and B2T (dual set point) are housed models, well-suited for applications with the following requirements: high accuracy, housed with terminal strip, tamper-proof external adjustment, up to 18,000 psi and 24,000 psi proof.


. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DIAPHRAGM DIFFERENTIAL MODELS
Diaphragm differential models are for applications requiring instrument accuracy of +/- 0.5% and where cycles are fewer than 25 per minute. Available as single or dual setting units. Differential ranges from 03 to 150 psid.
SERIES DPD1T, DPD2T

Diaphragm Differential Switch

The DPD1T (single set point) and DPD2T (dual set point) are well-suited for applications with the following requirements: NEMA 4 housing with terminal strip, tamper-proof external adjustment, working ranges from 03 to 300 psi and set point ranges from 03 to 150 psi.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SOLID STATES MODELS:
The solid state pressure switches are for applications requiring precise monitoring, no deadband, and multiple switch points. These switches provide an extremely long life.
   
SERIES UDS3

Multiple output Electronic Switch
The UDS3 solid state pressure switch four discrete circuits in a single, compact unit.
SERIES SW2000

Electronic Pressure Switch
The SW2000 offers the accuracy of a solid state
pressure switch in two different configurations: as a dual pressure switch or as a single switch with 4-20mA output.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
STATIC O-RING MODEL
Static O-ring models offer a rugged design with a high cycle tolerance, long service life, and field-adjustable set points.
 
SERIES PSL

Explosion Proof O-ring Type
The series PSL is well-suited for applications
with the following requirements: explosion proof,
adjustable range up to 550 psi, rugged environment.

SERIES SGT

Tri-Mode Pressure Switch
The SGT combines a switch, gauge, and transmitter into one easy to use, self-diagnostic configuration

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Av. Rivadavia 11088 P.6° Dto.”B” (C1408AAX) Capital Federal - Argentina
Tel. /Fax (+54) 011 4644-0825 / 4644-1376